Defender 110 Suspension Parts
Defender 90/110 Front 3º Cranked Radius ArmsSuper light weight front radius arms 3 degrees cranked (44mm wide) for lifted vehicles. Powder coated grey, can be sprayed any colour. For vehicles with suspension lift, we recommend these 3º caster corrected radius arms to return the steering to the correct geometry. Genuine brand new parts supplied by...
Range Rover Classic Front 3º Cranked Radius ArmsSuper light weight front radius arms 3 degrees cranked (44mm wide) for lifted vehicles. Powder coated grey, can be sprayed any colour. For vehicles with suspension lift, we recommend these 3* caster corrected radius arms to return the steering to the correct geometry. Genuine brand new parts supplied by...
Land Rover Defender Rear Upper Shock Absorber Mount NRC7981 x 1 Defender Rear Upper Shock Absorber Mount which is a common weak point when changing shock absorbers.This is a Bearmach high quality replacement part.PART No: NRC7981
Defender 87-06 Front Axle Radius Arm To Chassis Poly Bush Kit SetFront Radius Arm Poly Bush Kit from Bearmach. This kit consists of 2 quality replacement POLY BUSH bushes for the rear of the front axle radius arm where it attaches to the chassis.BEARMACH PART No: BR 2170 P
Defender 83-12 Front Suspension Anti Roll Bar Bush (Pair)A pair of replacement front anti roll bar bushes to fit the front anti roll bar. This is a common MOT failure as the bushes perish and wear causing clunking and poor handling. Quality replacement part equivalent to Land Rover part number: NTC682BEARMACH PART No: BR0388
Defender/Discovery 200/300 V8 Rear Trailing Arm Bush with Bolt1 x rear trailing arm bush with bolt and nut. Beware of buying cheaper AND without the bolt as normally the bolt will be worn out leaving the same problem if not replaced.LAND ROVER PART No: NTC 1772BEARMACH PART No: BSC 205
Defender/Discovery Anti Roll Bar Drop Link Joint Bolt & Nut Front/RearComplete Drop Link Joint Bolt (includes 1 bolt and 1 nut) fits front and rear anti roll bar.Suits Defender and Discovery 1 modelsQuality Replacement Part for RYG501480 & NV116041L
Defender 93 Front Axle Radius Arm to Axle Poly Bush Kit SetThis kit consists of 4 quality replacement POLY BUSH bushes for the front of the front axle radius arm where it attaches to the axle.Land Rover Discovery 1 all models 1989 - 1998 LAND ROVER PART No: NTC6781BEARMACH PART No: BSC 206 PA
Defender 90/110 all models Hydraulic Steering DamperComplete with bushes, washers and nuts where neccessary required to fit. Equivalent to Land Rover part number: RTC4472ASuitable for all Land Rover Defender Models.QUALITY REPLACEMENT FOR RTC4472ABEARMACH PART No: BR 3604A
Defender 300tdi/TD5 Gearbox Mounting RubbersLand Rover Defender 300tdi/TD5 Gearbox Mounting RubbersGearbox Transmission Mounting Rubbers x 2 suits all Defender 300tdi/TD5 Engined VehiclesBEARMACH PART No: ANR3200 / ANR 3201
Defender/Discovery/Range Rover Classic Poly Bush KitBearmach polyurethane bush kits have been developed to give more positive location at pivot or fulcrum points and contain replacement bushes for: Front Radius Arms Axle End Front Radius Arms Chassis End Rear Trailing Arms axle end Rear Trailing Arm Chassis End Rear Axle Upper A-Frame - Chassis Pandhard...
Discovery 89-98 Front Axle Rubber Bolt-on Bump StopFront axle bump stops are fitted to the chassis on both sides of the vehicle to prevent the axle hitting the chassis at full axle articulation. Suitable for the following models:Defender all models 87-10Discovery 1 all models 89-98Range Rover Classic all models 87-95LAND ROVER PART No: ANR4188BEARMACH...
Defender 200/300 Tdi V8 Td5 Lower Suspension Coil Spring SeatThis Coil Spring Seat also fits: All Defender 90 FRONT and REAR Defender 110 and 130 model, FRONT only Discovery FRONT and REAR Range Rover FRONT and REAR QUALITY REPLACEMENT for Land Rover part: NRC9700BEARMACH PART No: NRC9700RSUPPLIED BY BEARMACH
Range Rover 200/300 Tdi V8 Td5 Lower Suspension Coil Spring SeatThis Coil Spring Seat also fits: All Defender 90 FRONT and REAR Defender 110 and 130 model, FRONT only Discovery FRONT and REAR Range Rover FRONT and REAR QUALITY REPLACEMENT for Land Rover Part: NRC9700BEARMACH PART No: NRC9700RSUPPLIED BY BEARMACH
Discovery 1 Rear Axle Upper Adjustable A Frame Ball JointBearmach Discovery 1 rear axle upper a frame ball joint - supplied by Bearmach with nut & split pin. This is manually adjustable as it wears so it lasts longer. Suits Defender, Discovery 1 and Range Rover Tdi models.QUALITY REPLACEMENT FOR PART No: ANR1799SBEARMACH PART No: TRE76RS
Land Rover Defender Swivel Stub Axle Inner Oil SealSuits Defender Rear Axle From 1980 Up to Chassis No: KA930455LAND ROVER PART No: FRC 3099BEARMACH PART No: BR3611